LDD-V-JIG | ADJUSTMENT JIG FOR COUNTER PLATE OF LDD-V | Industrial Components, Marine Hardware | Japanese Manufacturer | LAMP | Sugatsune Global
LDD-V-JIG

ADJUSTMENT JIG FOR COUNTER PLATE OF LDD-VLDD-V-JIG

2 / 2 total results

Filter items

invsible damper,hidden damper,invisible door hinge,invisible door,hidden damper

  • ADJUSTMENT JIG FOR COUNTER PLATE OF LDD-V
  • LDD-V-JIG

invsible damper,hidden damper,invisible door hinge,invisible door,hidden damper

For Lapcon door damper LDD-V only.
Used for adjusting the counter plate position of LDD-V.

Related Information

Drawings / Illustrations

  • Show All

    [How to Use]
    —1. Install the adjustment jig

    ①Fit the adjustment jig firmly into the body.

    *Right-handed and left-handed available.

    *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.

  • Show All

    —2. Horizontally adjust the counter plate

    ①Loosen the horizontal adjustment screws.

    ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.

    ③Tighten the horizontal adjustment screws.

  • Show All

    —3. Vertically adjust the counter plate

    ①Loosen the fixing nut.

    ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.

    ③Tighten the fixing nut or the counter plate shaft firmly.

  • Show All

    —4. Check

    ①When removing the jig and closing the door slowly to the end, “click” sounds once.

    *If the door does not close to the end or “click” sounds twice, perform depth adjustment.

    ②When opening the door, “click” sounds once, and the arm is pulled out.

    *If the arm can not be pulled out, perform depth adjustment.

    ③Check if the clearance between the arm and the counter plate shaft is appropriate.

  • Show All

    *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).

    ①Loosen the depth adjustment screws.

    ②Align the centre of the counter plate shaft with that of the door thickness.

    ③Tighten the depth adjustment screws.

  • [How to Use]
    —1. Install the adjustment jig

    ①Fit the adjustment jig firmly into the body.

    *Right-handed and left-handed available.

    *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.
  • —2. Horizontally adjust the counter plate

    ①Loosen the horizontal adjustment screws.

    ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.

    ③Tighten the horizontal adjustment screws.
  • —3. Vertically adjust the counter plate

    ①Loosen the fixing nut.

    ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.

    ③Tighten the fixing nut or the counter plate shaft firmly.
  • —4. Check

    ①When removing the jig and closing the door slowly to the end, “click” sounds once.

    *If the door does not close to the end or “click” sounds twice, perform depth adjustment.

    ②When opening the door, “click” sounds once, and the arm is pulled out.

    *If the arm can not be pulled out, perform depth adjustment.

    ③Check if the clearance between the arm and the counter plate shaft is appropriate.
  • *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).

    ①Loosen the depth adjustment screws.

    ②Align the centre of the counter plate shaft with that of the door thickness.

    ③Tighten the depth adjustment screws.

Spec Table

Body

Image Item Name Item Code Quotation
LDD-V-L-JIG 270-025-275
LDD-V-R-JIG 270-025-276
Image Item Name Item Code Quotation RoHS Spec Type Material Colour EAN

LDD-V-L-JIG

270-025-275

Left-handed

Other

ABS

Orange

4510932134675

LDD-V-R-JIG

270-025-276

Right-handed

Other

ABS

Orange

4510932134682

Slide to See More

CAD download

Body

Item Name
LDD-V-L-JIG
LDD-V-R-JIG
Item Name 2D 3D Others RoHS Item Code
LDD-V-L-JIG DXF DWG SAT IGES X_T STEP 3DPDF

270-025-275

LDD-V-R-JIG DXF DWG SAT IGES X_T STEP 3DPDF

270-025-276

Slide to See More

Catalogue

Related products

Category

Your Recently Viewed Items

You have no recently viewed products.

If you would like to keep track of items viewed, click on the "Keep History" button below.

You have no recently viewed products.

-All items, unless specified, are made to exact metric dimensions.

-Changes in dimensions, finishes, and packing etc. or suspension of production may occur without notice.

-Our liability is limited to the replacement of the merchandise.

×
Filter
Filter items
Search Clear All ×
RoHS 2
CAD
Loading
Cookies and Privacy

Cookies help us improve your website experience. By using our website, you agree to our use of cookies.

Learn More