TORQUE HINGEHG-RT
2 / 2 total results
- Passed for the 20,000 open/close private cycle test
- Free Stop
friction hinge, Positioning hinges, position controle
- Hinge is completely hidden when the door is closed.
Torque decreases as the opening angle increases, making easier to open the lid (refer to "Torque Curve" at the lower left).
Use with top-opening lids (opening angle 0 degrees~100 degrees) (free stop range).
Non-friction torque type also available - Specification
- —Operating temperature: 0°C–40°C
- Recommended Screw
- —Countersunk head tapping screw 4 or Countersunk head screw M4
Related Information
Spec Table
Body
CAD download
Catalogue
Note
—Be sure to read the "Cautions".
—Torque changes with the opening angle (refer to "Torque Curve" at the lower left).
—When selecting, ensure that the maximum torque of lid (door) is less than half of the torque at the hinge closed position (see the table below).
—Set a stopper in the Range where torque is not effective (refer to "Free Stop Range" at the left)
—When installing, ensure that both hinge shafts are levelled and aligned.
Related products
Category
Your Recently Viewed Items
You have no recently viewed products.
If you would like to keep track of items viewed, click on the "Keep History" button below.
You have no recently viewed products.
-All items, unless specified, are made to exact metric dimensions.
-Changes in dimensions, finishes, and packing etc. or suspension of production may occur without notice.
-Our liability is limited to the replacement of the merchandise.