- HG-CV-127
CLEAN ROOM HINGEHG-CV-127
2 / 2 total results
- Passed 200,000 open/close private cycle test
- Suitable for use in a clean room.
Built-in thrust bearing and needle bearing reduce metal-to-metal friction.
Seal of rotating part prevents metal powder from scattering.
Welded curl part provides excellent durability. - Application
- —Semiconductor manufacturing equipment, clean room, etc.
Spec Table
Body
CAD download
Catalogue
Note
—Install the shaft downwards on the door side.
—Load capacity and open/close test under the following conditions: door size H2000⨯W900mm, door weight 100kg, two hinges used, installation pitch 1600mm.The shaft may be difficult to pull out because there is very little clearance in the structure. Forcible removal may result in damage.
Category
Your Recently Viewed Items
You have no recently viewed products.
If you would like to keep track of items viewed, click on the "Keep History" button below.
You have no recently viewed products.
-All items, unless specified, are made to exact metric dimensions.
-Changes in dimensions, finishes, and packing etc. or suspension of production may occur without notice.
-Our liability is limited to the replacement of the merchandise.
-
Length L (mm)
-
- -
-
Width W (mm)
-
- -
-
Leaf Thickness
-
- -
-
Load Capacity N/2pcs
-
Load Capacity N/1pc