- Industrial Component Hardware
- Linear Guide Compatibility Checker
Linear Guide Compatibility Checker
You can quickly determine the suitable Linear Guide!
The results provided by this tool are purely computational and intended for reference only. Please verify with the actual machine or a test machine when finalizing the type.
This tool may be difficult to use on a smartphone. Please use a computer.
Please select and enter conditions according to the steps provided.
STEP1 : Selection of Usage Conditions
| 1 | In cases of low movement frequency and mild operating conditions. |
|---|---|
| 2 | In cases requiring frequent movement and smooth running performance. |
| 3 | In cases with frequent movement, vibration, and impact. |
STEP2 : Input of Safety Factor
Static Safety Factor
Please select a value within the range of to .
Dynamic Safety Factor
Please select a value within the range of to .
| Static Safety Factor (Min - Max) |
Dynamic Safety Factor (Min - Max) |
|
|---|---|---|
| In case of Usage Condition 1 | 0.4 〜 0.5 | 0.9 〜 1.0 |
| In case of Usage Condition 2 | 0.3 〜 0.4 | 0.6 〜 0.8 |
| In case of Usage Condition 3 | 0.2 〜 0.3 | 0.3 〜 0.5 |
STEP3-1 : Confirming Maximum Load & Operational Load
Please enter the maximum value that applies per guide block 1.
Fx and Fy cannot be input simultaneously.
| N | kgf | |
|---|---|---|
| Fx Max Load | ||
| Fx Operating Load | ||
| Fy Max Load | ||
| Fy Operating Load |
Result
After entering STEP 1 to 3 , the results based on compatibility will be displayed.
| MR-15CS | - | - | - | - |
|---|---|---|---|---|
| MR-20 | - | - | - | - |
| MR-30 | - | - | - | - |
| MR-40 | - | - | - | - |
| MLG-13C | - | - | - | - |
| MLG-20C-8 | - | - | - | - |
| MLG-20CS | - | - | - | - |
| MLG-20C | - | - | - | - |
| MLGX25 | - | - | - | - |
|---|
Please note: MLGX has different standards. Please check separately.
STEP3-2 : Confirmation of Maximum Moment & Operating Moment
Please enter the maximum value that applies to each guide block.
MMx, My, and Mz cannot be entered at the same time.
| N・m | kgf・cm | |
|---|---|---|
| Mx Max Load |
||
| Mx Operating Load |
||
| My Max Load |
||
| My Operating Load |
||
| Mz Max Load |
||
| Mz Operating Load |
Result
After entering STEP 1 to 3 , the results based on compatibility will be displayed.
| MR-15CS | - | - | - | - | - | - |
|---|---|---|---|---|---|---|
| MR-20 | - | - | - | - | - | - |
| MR-30 | - | - | - | - | - | - |
| MR-40 | - | - | - | - | - | - |
| MLG-13C | - | - | - | - | - | - |
| MLG-20C-8 | - | - | - | - | - | - |
| MLG-20CS | - | - | - | - | - | - |
| MLG-20C | - | - | - | - | - | - |
| MLGX25 | - | - | - | - | - | - |
|---|
Please note: MLGX has different standards. Please check separately.
Reference Values
Standard values for each product
| Product | Fx Horizon Static Load N |
Fy Vertical Static Load N |
Mx Vertical Static Rating M N |
My Horizon Static Rating M N |
Mz Horizon Static Rating M N |
|---|
Load calculated from the safety factor entered
| Maximum Load | Operating Load | Maximum Moment Load | Operating Moment Load | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Fx Max load N |
Fy Max load N |
Fx Operating Load N |
Fy Operating Load N |
Mx Max M load N・m |
My Max M load N・m |
Mz Max M load N・m |
Mx Operating Load N・m |
My Operating Load N・m |
Mz Operating Load N・m |
|
| MR-15CS | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| MR-20 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| MR-30 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| MR-40 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| MLG-13C | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| MLG-20C-8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| MLG-20CS | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| MLG-20C | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Products
Your Recently Viewed Items
You have no recently viewed products.
If you would like to keep track of items viewed, click on the "Keep History" button below.
You have no recently viewed products.
Loading
